Robot vacuum cleaner with wiping function RCV 3 Robot Vacuum Cleaner
The smart RCV 3 comes with precise LiDAR navigation and convenient app control to fully customise your cleaning routine. The machine also has a wiping function for hard surfaces.
More time for the enjoyable things in life: the smart RCV 3 Robot Vacuum Cleaner takes over the floor cleaning. The RCV 3 robot systematically and independently cleans your hard floors and low-pile carpets. Dry dirt is reliably transported into the built-in waste container by the rotating brush, the side brush for the edges, and the fan. Where needed, the RCV 3 doesn't just vacuum, but can also damp mop your hard floors. As the battery capacity decreases, the RCV 3 can regularly charge itself and, after the work is done, it always returns to the charging station. Via the app, the device will automatically create a map of the rooms by detecting the surroundings using built-in LiDAR navigation. Individual cleaning parameters can be set for every room - simply select which rooms should be vacuumed, mopped or not cleaned. Additional sensors prevent the device from falling and you can use a preset individual schedule or press a button on the device to start your cleaning. Voice output of the device will provide the most important information and status.
Features and benefits
Simultaneous Vacuum & Mop
For even better cleaning results, the RCV 3 can also damp mop. If needed, use the wiping unit with microfibre cloth, fill the fresh water tank and you are ready to go. The RCV 3 cleaning robot can either be used for dry cleaning only, for wet mopping only, or with both options together in combined cleaning mode.
Precision LiDAR Mapping
LiDAR sensors on the RCV 3 allow it to have precise room recording and create detailed mapping for safe cleaning. With its fast and robust LiDAR navigation, the RCV 3 scans your rooms and thus has the best maps to navigate safely and reliably through rooms, even in the dark.
Fall sensors
The fall sensors reliably prevent the RCV 3 from falling down steps or drops. Advanced sensors scan the floor in real-time. If a ledge or staircase is detected, the RVC 3 instantly pivots to ensure a safe cleaning path.Secure Data & Automatic Updates
- Built on German engineering and trust. Kärcher prioritises your privacy, ensuring all data meets the highest legal security standards.
- The entire data transfer between the Home Robots app and your robotic vacuum cleaner and mop runs via a cloud to servers located in Germany only.
- Always improving. Automatic updates constantly enhance performance and security, keeping your system at the cutting edge.
Voice output
- Always well informed: the RCV 3 uses voice output to provide important information and share the current status.
- If the RCV 3 robotic vacuum cleaner needs help or a service, it will mostly tell you via voice output.
Smart App & Voice Control
- Total control at your fingertips. Use the app to fine-tune every setting to suit your home and your schedule.
- Using the app, you can configure the RCV 3 cleaning robot and control it from any location. Even if you're not at home.
- Stay updated in real-time. Track cleaning progress and monitor the robot’s status directly through the intuitive app interface.
Multi-Floor Mapping & Custom Zones
- Seamless multi-floor cleaning. The app stores detailed maps for every level of your home for effortless, targeted cleaning.
- It is possible to define zones where you do not wish the robot to go.
- Targeted Intensive Cleaning. Define high-traffic zones for a double-pass clean, or boost water flow for a deeper mop in kitchens and hallways.
Customisable Cleaning Parameters
- Tailored cleaning for every room. Easily adjust suction power, water volume, and cleaning frequency via the app.
Timer program
- You can schedule cleaning times and create cleaning plans via the app.
- The RCV 3 independently starts cleaning journeys based on scheduled dates and times.
Specifications
Technical data
| Battery powered device | |
| Battery charging time (min) | 230 |
| Battery type | Lithium ion battery |
| Battery capacity (Ah) | 3.2 |
| Running time per charge (min) | 120 |
| Dirt container (ml) | 500 |
| Suction Power (Pa) | 2500 |
| Sound power level (dB(A)) | 67 |
| Number of current phases (Ph) | 1 |
| Voltage (V) | 100 - 240 |
| Frequency (Hz) | 50 - 60 |
| Colour | white |
| Weight, base station (kg) | 0.6 |
| Weight incl. packaging (kg) | 6.8 |
| Dimensions, base station (L x B x H) (mm) | 80 x 150 x 102 |
Scope of supply
- Cleaning brush
- Filter: 2 x
- Wiping cloth: 2 x
- Dirt container
- Charging station
Equipment
- autonomous cleaning
- Fall sensors
- operation using app
- Voice output
- Timer program: several timers possible
- Cleaning modes: Dry cleaning
Videos
Application areas
- Hard floors
- On low-pile carpets and rugs (up to 25mm climbing power)
Accessories
Find parts
Find parts & diagrams for your Kärcher cleaning equipment. Select “Find Parts” to begin your search or contact your authorized Kärcher dealer or retailer.
